Meet Leslie Lake in our Customer Spotlight!
Meet Leslie Lake in our Customer Spotlight!
Click on above image to zoom
McNeilus 1139095 Drum Charge Discharge Solenoid Coil - RE Control Valve
Aftermarket Replacement Unit of Measurement: Each
This item is NOT eligible for returns or cancellations
-Two of these coils are commonly used on Eaton Cartridge #202603-000 for the mixer drum charge/ discharge function on Eaton 54 Series Pumps.
-12 V DC
-9.8 Ohms
-1.22 Amps
-14.7 Watts
-Delphi Weather Pack (12010973)
-Diode
-1/2" Hole Diameter (Size 8)
Do you have a question about this product?
Ask one of our experts
Ask one of our experts
Technical Information
Warning!!!!!!! Use 1139095 for a single coil replacement You can use single coil # 1139095 if only 1 coil is needed. You can also use 2 of the 1139095 coils instead of the 6HB486 two coil assy. However, you will need to reuse the 4 pin connector or rewire using two 2 pin connectors. Use 6HB486 for a 2 coil replacement with a single 4 Pin Weatherpak Connector. (# 0126224 is a duplicate of 6HB486) BEWARE: The 6HB486 (Duplicate # 0126224 ) 2 coil assy may need to have the pins rearranged for proper polarity alignment with the truck's wiring. There is a wiring configuration difference between MTM units, Oshkosh units, and other OEM's units!!! Do not use the 2 coil set unless you verify when installing that the coils red lead will connect to the the positive lead coming from the harness. Customer must verify polarity before plugging in and using otherwise damage to the coil will occur. In all cases make sure to pin electrical connectors for proper polarity alignment for the unit!!!!